Update

Need to make some terrain for Kublacon in May and started cranking out some bocage and such.

This is two 10-12" pieces of modular bocage.  They are not completed need a few touch ups here and there.  Sorry for the last few pics they were taken with my iPhone.

PAINTING GUIDE

Max's Guide to Painting WWII Fallschirmjagers

(PART 1)

If you are like me and have a huge affinity for the history and equipment used by the German Fallschirmjagers during WWII and you play miniature wargames, I'm sure you've assembled somekind of Fallschirm unit.
This is but one of many guides out here in the web designed to teach you how to paint your miniatures. This is not THE only way to paint FJ figures but one of MANY ways. I've been comlpimented by many blog visitors and fellow wargammers on how I've painted my Fallschirm. I've been asked by a few to share my colors and techniques so I decided to take a break from my Aufklarungs company and paint a few Fallschirm minis!


COLORS:
The basic guide in Battlefront's “Hell's Highway” is what I tend to follow. It is very informative. Just beware the book states to use a brown color for the boots which, although not incorrect, brown boots where rare during wartime.
There are three different smocks that were used during the war. The Type II, which was a step in style, was worn during 1939-40 exclusively. These were seen worn throughtout the war but were not as common after 1944. You would not see a squad of fallschirm wearing all Type II smocks during or after Normandy.

Type II Smock aka "Step-In".  Most came in Grey Green but some were made in Splinter "B"

The color I use to paint this smock is Vallejo 924 “WWII Russian Uniform”. In my opinion it is the closest color for this smock.  As a note, there were examples of Type II smocks manufactured in the Luftwaffe Splinter Pattern (Splinter B). These were said to be issued to the Sturm Regiment but I do not have any validating information.


The Type III smock was introduced right before Crete in 1941 and saw service during the operation though most Fallschirm still wore Type II “Green Grey” smocks. The Type III was designed so the legs could be unbuttoned for easier removal. This made it easier to put on and take off. For the purposes of modelling at the 15mm scale one would not know the difference unless the smock was unbuttoned at the legs which would make the miniature look like a overcoat.

Type III Smock in Splinter "B"

The Type III smocks came in two colors (some say they were also made in Waffen -SS “Pea Dot”); Luftwaffe Splinter “B” and Water-Tan. Splinter “B” differed from the Heer's Splinter “A” slightly. The patten was similar but the green “rain drops” in the pattern went vertical instead of horizontal in the Luftwaffe “B” pattern.

Type III Water-Tan (aka Marsh)

For the Splinter “B” pattern I use Vallejo 821 “German Beige” for the base, 872 “Chocolate Brown” for the brown, and 823 “Lufwaffe Camo Green” for the green.

The Water-Tan (or Marsh) pattern came out in 1943 (some say 1942). It is similar to the Splinter “B” in pattern but with different colors. At 15mm scale the pattern would almost be identical.

For the Water-Tan pattern I use Vallejo 978 “Dark Yellow” for the base, 982 “Cavalry Brown” for the brown, and 893 “US Dark Green” for the green.  A varient would be the 821 and 872.

Splinter "B" Helmet Cover

STEP 1: Clean and Primer



First step I take is clean the flash as best as possible from the figure, wash in warm soapy water, and let dry. Once dry, I give the figure a wash in rubbing alcohol, let it sit for about 10 minutes and then use my airbrush to primer the miniature with flat black paint (usually Vallejo Flat Black). Any flat black color will do. After this coat has dried for a few minutes I do a light overspray of a light gray primer. Again, any primer will do.

STEP 2: Base Colors

The miniature in this guide is being painted in the tropical scheme.  The uniform worn in the mediterranian was usually the tropical pants although "continental" wool jump pants were not uncommon.  I elected to paint this miniature without a helmet cover and painted his helmet in a "turtle" shell camo varient that was seen in Italy.

Second step is to lay down you base colors:


Part                                                                                                  Vallejo Color                                
Face and hands                                                                               “Beige Brown” 875

Helmet (non-helmet cover)                                                              “Green Ochre” 914

Helmet Chin Strap, Breadbag                                                          “Field Blue” 964

Type II Splinter “B” Smock (Base)                                                  ”German Beige” 821

Belt, Pistol Holster, Tornister Straps                                                “Flat Black”

Y-Straps (Cavalry/Light Weight)                                                     “Calvary Brown” 982

Tropical Pants                                                                                 “Middletone”

Continental (Jump) Pants                                                                 “German Grey” 830

MP-40 Magazine Pouch*                                                               “US Dark Green” 893

Canteen                                                                                          “German Camo Brown” 825

Canteen Cup*                                                                                 “Middletone”

Note I did NOT paint the green and brown camo on the smock. This is done after step 4.

*- German pouches were originally made of leather but even early on in the was they began being manufactured in cloth. They were made in green, tan, and field blue. Same thing with the breadbags. The canteen cups, as well as mess tins, were often repainted in the field. Originally these came in black or field grey btu troops often repainted them.

STEP 3: Gloss Varnish and Wash

Third step is to let the miniature dry well for several hours. Once dry, seal the miniature with several light coats of gloss varnish. Once this is dry (I let mine dry for about 2-3 hours), I give the model a good wash of Vallejo Black and Sepia washes miked with water (3 parts water, 2 parts black and 1 part Sepia). Let this dry for atleast 4-5 hours.

STEP 4: Dry brush/highlights

Fourth step is to highlight the base colors. The emphasis here is on the garments, helmet and skin. I use a combination of drybrushing and highlighting using lighter shades of the base colors. I lighten the base color using Vallejo “Sunny Skintone” or any other flesh color. It works for me as it “seems” to have a more subtle transition than white.

STEP 5: Camo

Step four is when I lay down my brown and green camo. Using a 5/0 brush, I thin the respective color with water or yoru favorite thinnerso it flows really well. Study the camo pattern and note how, for example Splinter “B”, you can note its almost a “Y” or even “L” type shape. Take your time and generate the “Y”s and “L”s. A trick that I found is to section the smock off. Arms, back, chest, and skirt. Remember that when the garmet is made the pattern will not continue in these ares as the cloth is cut cutting the pattern off.

I start off with the brown.

Then go to the green. I make my green mix in witht the brown as they tended to overlap each other in the printing process.

More to come.......

Steveogradskie Vodka Factory

I painted up one of JR Miniatures buildings to donate to Steve's (What would Patton Do) Stevograd city.

Its pretty much dont just going to hit it with some pigments, seal it and ship it off.

Day Off #1 - Modular STUG III, Vickers Mk. VIC, and Panzer IV Hs

Hey everyone,

Well day off #1 (that is from the Commander and 5 year old).  Got some stuff done spent the better part of 6 hours doing some modelling.

I have 3 more STUG IIIs to build for my Fallschirm and for general use.  I decided to make them modular much like the PZ IIIG/Hs I posted last week.  So I used the 1/16" x 1/32" magnets and magnetized the three gun barrels for the STUGs.  No I can  field 75mm, 75mm "Pig Head", and 10.5cm.

Next I dusted out the airbrush again and painted up a few goodies after I built them.  Last night I finished a Vickers Mk. VIc for early war.  Today i gave it a primer, base coat and camo.  I'm fairly happy with it.

I used Russian Uniform Green and Violet Brown.  Not sure if the base color (Russian Uniform Green) is gonna work.  I had to darken the Violet Brown a bit. 

Shes not close to being done yet. I just felt like painting something different.





And finally I built and painted these three Panzer IV Hs for my Aufklarungs Company.  I built them, primered and painted the camo.  They are far from done.  Antennas, camo netting, and finish up the detail work.